• Home
  • Atomizers
  • Pumps
  • Sprayers

Overview | Agricultural Applications | Complete Sprayers |  Kits  | Custom | Resources

Overview | Power Systems | Atomizers | Chem Systems | Structure & Misc. | Preconfigured Kits | Request a Quote

Kits: Step 2. Choose Your Atomizers

Overview
PT100 Air assist
PT101 Air assist, Ultra-Fine
PT050 Air assist
Other Hydraulic Atomizers
Electric Atomizers

If you haven't already chosen a POWER SYSTEM, do that first. Choose your type and quantity of atomizers on the above tabs. When you are done, proceed to the Chem Systems Section to choose fluid metering components.

There are literally hundreds of possible configurations to suit your needs. For simplicity, only the most common are shown here. For a more comprehensive list of atomizer options, please click the Proptec Atomizer Builder or Penguin Atomizer Builder pages, or call us for expert applications assistance.

If you want to apply pesticide, you will most likely want a PT100 series or PT050 Series. For non-mobile agricultural, industrial, or other applications, you may want one of out other hydraulic or electric atomizers. Again, please dont hesitate to call for applications assistance.

 

 

 

PT100 Atomizers are our original atomizers, ideal for high-productivity pesticide application, water evaporation, dust control, and other high-volume misting. clicking an atomizer in the right hand column will add it to your shopping cart (coming soon). You can build a custom kit by clicking the components you desire, then viewing your shopping cart. If you want help in making your choice, please call or email us- we'll be happy to help.

Picture Callout Description Price:

front view of PT50 and PT100 Atomizer

photo of PT100 Atomizer with U style mounting bail

 

Proptec™ PT100-A atomizer

Ideal for horizontal boom mounts, and vertical-up mounting as in evaporation applications. Stainless steel u-bail mount.

Callout: PT100AS01EBAA

Typical uses: Ag pesticide application, wastewater evaporation.

Flow range: 0-3.5 Gallons per minute (13.5 lpm)

GPM hydraulic oil required: 4 GPM @ 2500 PSI Max

Max air: 10,000 CFM (300 cmm) max velocity 70 MPH, adjustable. Max RPM's 5500.

weight: 17#, est 30# w hoses and brackets.

noise: approximately 95 Decibels at full blade pitch

Purchase boom mount brackets separately

$1865.00

 

PT100-B Atomizer from front

PT100-B from rear, showing L style bail mount

 

Proptec™PT100-B Atomizer

Most common design for agricultural applications. Highest versatility. Powdercoated L-Bail mount.

Callout: PT100AS01EBAB

Typical uses: Ag pesticide application, wastewater evaporation. Most common agricultural atomizer.

Flow range: 0-3.5 Gallons per minute (13.5 lpm)

GPM hydraulic oil required: 4 GPM @ 2500 PSI Max

Max air: 10,000 CFM (300 cmm) max velocity 70 MPH, adjustable. Max RPM's 5500.

Weight: 17#, est 30# w hoses and brackets.

Noise: approximately 95 Decibels at full blade pitch

Purchase boom mount brackets separately

$1865.00

front view of PT50 and PT100 Atomizer

photo of PT100 Atomizer with U style mounting bail

closeup of motor assembly showing dual injector tubes for extra flow capacity

Proptec™PT100-C Atomizer

Dual injector tubes for high volume spraying. U-Bail for vertical-up applications.

Callout: PT100AS02EBAA

 

Typical uses: wastewater evaporation, high-volume misting and cooling, where higher flows to 6 gallons per minute are required. Also for situations where two fluids cannot be mixed until the moment of application, and must be introduced separately to the atomizer.

Flow range: 0-6 Gallons per minute (13.5 lpm)

GPM hydraulic oil required: 4 GPM @ 2500 PSI Max

Max air: 10,000 CFM (300 cmm) max velocity 70 MPH, adjustable. Max RPM's 5500.

Weight: 17#, est 30# w hoses and brackets.

Noise: approximately 95 Decibels at full blade pitch

Purchase boom mount brackets separately

$1881.72

PT101 Atomizers are specialized for ultra-fine mist applications, such as dispersal of fumigation or odor control substances. They create a medium-low volume of air and a wide conical pattern that disperses quickly.

clicking an atomizer in the right hand column will add it to your shopping cart (coming soon). You can build a custom kit by clicking the components you desire, then viewing your shopping cart. If you want help in making your choice, please call or email us- we'll be happy to help.

Picture Callout Description Price:
PT101 Atomizer

Proptec™PT101 atomizer

12" Atomizer basket for the finest mists. L style bail for flexibility in mounting.

Callout: PT100AL01EFAB

Typical uses: Odor control applications, fumigation, humidification.

Flow range: 0-3.5 Gallons per minute (13.5 lpm)

hydraulic oil required: 4 GPM @ 2500 PSI Max

Max air: 1500 CFM (50 cmm), adjustable. Max RPM's 5500.

weight: 18#, est 30# w hoses and brackets.

noise: approximately 90 Decibels at full blade pitch

Purchase boom mount brackets separately

$2049.00

PT050 Atomizers look identical to our original PT100 air-assisted and guarded atomizers, but require less hydraulic oil and less horsepower to run. Ideal for sprayers powered by tractor remote hydraulic systems, or for very large self-propelled sprayers in vegetable or row crops- power up to 20 atomizers on a single sprayer!

Picture Callout Description Price:

front view of PT50 and PT100 Atomizer

photo of PT100 Atomizer with U style mounting bail

 

Proptec™ PT050-A atomizer

Ideal for horizontal boom mounts, and vertical-up mounting as in evaporation applications. Stainless steel u-bail mount.

Callout: PT050AS01EBAA

Typical use: pesticide application

Liqid flow range: 0-3.5 Gallons per minute (13.5 lpm)

GPM hydraulic oil required: 2 GPM @ 2500 PSI Max, 3 HP

Max air: 6000 CFM (300 cmm) max velocity 50 MPH, Fixed plade pitch. Max RPM's 5500.

Weight: 17#, est 30# w hoses and brackets.

Noise: approximately 95 Decibels at full blade pitch

Purchase boom mount brackets separately

$1865.00

PT100-B Atomizer from front

PT100-B from rear, showing L style bail mount

Proptec™PT050-B Atomizer

Most common design for agricultural applications. High versatility. Powdercoated L-Bail mount.

Callout: PT050AS01EBAB

Typical use: pesticide application

Liquid flow range: 0-3.5 Gallons per minute (13.5 lpm)

GPM hydraulic oil required: 2 GPM @ 2500 PSI Max, 3 HP

Max air: 6000 CFM (200 cmm) max velocity 50 MPH, fixed blade pitch. Max RPM's 5500.

Weight: 17#, est 30# w hoses and brackets.

Noise: approximately 95 Decibels

Purchase boom mount brackets separately

$1865.00

 

Beyond the PT050 and PT100 Series, we offer many other hydraulic atomizer configurations. A few of the most popular are shown below. Ideal for spraying in severe environments, hydraulic motor driven atomizers operate in high heat, highly abrasive, or highly corrosive environs where an electric motor would not be suitable. Use in stacks, seed treaters or other bulk treatment operations, plenums, or other specialized industrial processes. May be coupled with your fan to provide a custom spray profile, especially in mobile applications.

Picture Callout Description Price:
PT099 and PT049 Severe Duty Atomizer

Proptec™PT049-SD

Dual Stage, 6" coarse Basket, Severe Duty Atomizer, Lo-HP

Callout: PT050-SDS1CCA

 

Proptec™PT099-SD

Dual Stage, 6" coarse Basket, Severe Duty Atomizer, Hi-HP

Callout: PT100-SDS1CCA

Typical uses: radial spray application in columnar flows, especially in the presence of heat, corrosive or abrasive elements. No polymers exposed to ambient, all exposed parts aluminum or stainless steel. Operate in up to 800 degree F ambient. Stainless steel Male JIC chem attachment for reliable fluid connection with braided hose assemblies. Long life, low maintenance.

Max oil consumption: 2.5/4.5 GPM, typical pressure 600-1000 PSI. Max RPMS: 6000.

Max fluid flow: 0-3.5 GPM.

noise: 60-65 decibels

Weight: approximately 7 pounds (3 Kilograms)

Does not require additional mounting brackets.

$1454.63

 

 

 

 

 

$1454.63

PT099 and PT049 Severe Duty Atomizer

Proptec™PT049-SD-SS

Dual Stage, 6" coarse Basket, Severe Duty Atomizer, All- stainless, Lo-HP

Callout: PT050-SDS1BCA

 

Proptec™PT099-SD-SS

Dual Stage, 6" coarse Basket, Severe Duty Atomizer, All-stainless, Hi-HP

Callout: PT100-SDS1BCA

PT049/PT099-SD-SS are similar to PT049/PT099 SD, but are specified when the entire fluid path must be Stainless Steel.

Max oil consumption: 2.5/4.5 GPM. 400-1000 PSI typical operating pressure. Max RPMS: 6000.

Max fluid flow: 0-3.5 GPM as specified, up to 6 GPM possible.

Noise: 60-65 decibels

Weight: approximately 9 pounds (4 Kilograms)

Does not require additional mounting brackets.

$2257.75

 

 

 

 

 

 

$2257.75

PT049 and PT099 with 12" basket

Proptec™PT049-C

dual stage atomizer, 12" fine mesh, low hydraulic flow

Callout: PT050PM01AFSX

 

Proptec™PT099-C

dual stage atomizer, 12" fine mesh, high hydraulic flow atomizer

Callout: PT100PM01AFSX

Max oil consumption PT049: 2.5 GPM, PT099: 5 GPM.

Max RPMS: 6000.

Max fluid flow: 0-3.5 GPM, optimum range 0-2 GPM. Other configurations to 8 GPM

Typical pattern:Radial, to 7’ (2 meter) radius

Weight: approximately 3 pounds (1.5 Kilograms)

Noise: 65 Decibels

Droplet spectrum: very fine/near fog. narrow spectrum.

Max particulate in sprayed fluid: .016" (.4 mm)

Mount directly to Isolation Mounting. For directional mounting capability, Purchase Bail and boom mount brackets separately

$1293.44

 

 

 

 

 

 

$1293.44

PT099 air-assisted

Proptec™PT099-E

dual stage atomizer, 12" fine mesh, air assisted, high hydraulic flow atomizer

Callout: PT100PM01EFSX

not offered as PT049 series.

Max oil consumption: 4.5 GPM. 2500 PSI typical operating pressure

Max RPMS: 5500.

Max fluid flow: 0-3.5 GPM, up to 6 GPM possible.

Max air flow: 1800 CFM (60 cmm)

Weight: approximately 4 pounds (1.5 Kilograms)

Noise: 85-90 Decibels

Droplet spectrum: Very fine/ near fog.

Max particulate in sprayed fluid: .016" (.4 mm)

Note: requires guarding or operation in enclosed/inaccessable area

$1433.85
PT049-35-T1-0200

Proptec™ PT049-A

premium duty dual stage atomizer, 6" coarse basket, low hydraulic flow

Callout: PT050PM01CBSX

 

Proptec™ PT099-A

premium duty dual stage atomizer, 6" coarse mesh basket, low hydraulic flow

Callout: PT100PM01CBSX

motor: 50 or 100 series, 5500 max RPM

Max oil consumption: 2.5/4.5 GPM

injector plate: single tube, 3.5 GPM Max

hub: 0-3.5  GPM Aluminum

basket: 6” 12 mesh (coarse)

typical droplet spectrum- 70 micron & higher.

typical pattern: Radial, to 6’ (2 meter) radius

noise: 60 decibels

weight: 4# (1.8 kg)

max particulate in sprayed fluid: .060 inch (2 mm)

$1079.24

 

 

 

 

 

$1079.24

PT049-35-T1-0200

Proptec™ PT049-B

premium duty dual stage atomizer, 6" fine mesh basket, low hydraulic flow

Callout: PT050PM01ADSX

 

Proptec™ PT099-B

premium duty dual stage atomizer, 6" fine basket, high hydraulic flow

Callout: PT100PM01ADSX

motor: 50 or 100 series, 5500 max RPM

Max oil consumption: 2.5/4.5 GPM

injector plate: single tube, 3.5 GPM Max

hub: 0-2  GPM Aluminum

basket: 6” 30 mesh

typical droplet spectrum- 70 micron & higher.

typical pattern: Radial, to 6’ (2 meter) radius

noise: 60 decibels

weight: 4# (1.8 kg)

max particulate in sprayed fluid: .016 inch (.4 mm)

$1079.24

 

 

 

 

 

$1079.24

Proptec™PT099-D

dual stage atomizer, 6 " coarse mesh, air assisted, high hydraulic flow atomizer

Callout: PT100PM01EBSX

Max oil consumption: 4.5 GPM. 2500 PSI typical operating pressure

Max RPMS: 5500.

Max fluid flow: 0-3.5 GPM, up to 6 GPM possible.

Max air flow: 10,000 CFM (60 cmm)

Weight: approximately 4 pounds (1.5 Kilograms)

Noise: 85-90 Decibels

Droplet spectrum: Fine.

Max particulate in sprayed fluid: .060" (2 mm)

Note: requires guarding or operation in enclosed/inaccessable area

$1219.65
     

 

For Portable or non-mobile applications, electric atomizers are often the most convenient and cost-effective option. to learn more about Electic atomizers, visit our ATOMIZERS | PENGUIN page.

If you are a European, African, Indian, or Australian, be sure to choose a 50 Hz version. If you're not sure what power you have, call for design assistance.

If you are choosing an electric atomizer, you do not need a power system. Penguin Atomizers can be powered by portable generators, which we invite you to source locally or Contact Us for a custom quote.

Picture Callout Description Price

dual stage electric atomizer, 6" Basket

coarse mesh basket shown

PT200-20-2T1-0230

Penguin™ PT200 6" fine mesh atomizer

  • 1HP 110/220 V 50/60 Hz single phase, CE rated motor- ready for virtually any installation. 3 phase also available.
  • speed: fixed 3450@ 60 Hz, 2900@ 50 Hz.
  • max fluid flow: 0-.5 GPM
  • weight: approximately 48 pounds (22 Kilograms)
  • noise: 60 Decibels
  • droplet spectrum: fine
  • max particulate in sprayed fluid: .016" (.4 mm)
  • mount any orientation. For flows less than .25 GPM, atomizer should not be installed in the Vertical-Up position.
 
dual stage electric atomizer, 6" Basket PT200-20-2T1-0200

Penguin™ PT200 6" coarse mesh atomizer

  • 1 HP 110/220 V 50/60 Hz single phase, CE rated motor- ready for virtually any installation. 3 phase also available.
  • Speed: fixed 3450@ 60 Hz, 2900@ 50 Hz.
  • Max fluid flow: 0-2 GPM as specified, up to 4 GPM possible.
  • Weight: approximately 48 pounds (22 Kilograms)
  • Noise: 60 Decibels
  • droplet spectrum: medium-fine
  • Max particulate in sprayed fluid: .060" (2 mm)
  • Mount directly, any orientation. For flows less than .25 GPM, atomizer should not be installed in the Vertical-Up position.
 
Penguin series dual stage atomizer, 12" fine mesh basket PT200-20-2T1-2230

Penguin™ PT200 12" fine mesh atomizer- the original Penguin atomizer!

  • 1 HP 110/220 V 50/60 Hz single phase, CE rated motor- ready for virtually any installation. 3 phase also available.
  • speed: fixed 3450@ 60 Hz, 2900@ 50 Hz.
  • max fluid flow: 2 GPM. Ideal range: 0-1 GPM
  • weight: approximately 48 pounds (22 Kilograms)
  • noise: 60 Decibels
  • droplet spectrum: very fine to near-fog
  • max particulate in sprayed fluid: .016" (.4 mm)
  • mount any orientation. For flows less than .25 GPM, atomizer should not be installed in the vertical-Up position.
 

Penguin series dual stage atomizer, 12" fine mesh basket

fine mesh basket shown

PT200-20-2T1-2200

Penguin™ PT200 12 " coarse mesh atomizer

  • 110/220 V 50/60 Hz single phase, CE rated motor- ready for virtually any installation. 3 phase also available.
  • speed: fixed 3450@ 60 Hz, 2900@ 50 Hz.
  • max fluid flow: 0-2 GPM, 4 GPM optional
  • weight: approximately 48 pounds (22 Kilograms)
  • noise: 60 Decibels
  • droplet spectrum: very fine
  • max particulate in sprayed fluid: .060" (2 mm)
  • mount any orientation. For flows less than .25 GPM, atomizer should not be installed in the Vertical-Up position.
 

Air-assisted Penguin Atomizer, 12" Basket

PT200-35A-2T1-2230

Penguin™ PT200 12" fine mesh atomizer, air-assisted

  • 2 HP 110/220 V 50/60 Hz single phase, CE rated motor- ready for virtually any installation. 3 phase also available.
  • speed: fixed 3450@ 60 Hz, 2900@ 50 Hz.
  • max fluid flow: 2 GPM. Ideal range: 0-1 GPM
  • weight: approximately 48 pounds (22 kilograms)
  • noise: 70-80 Decibels
  • droplet spectrum: very fine to near-fog
  • max particulate in sprayed fluid: .016" (.4 mm)
  • unguarded fan- must be installed in an inaccessable location
  • mount any orientation.
 

 

 

 

 

 

Ledebuhr Industries

Manufacturers of the finest quality

Proptec Sprayers and Rotary Atomizers

rotary atomizers and

Accu-Staltic Peristaltic Pumps

multiple channel metering pumps

Ledebuhr Industries, Inc.
Offices: 101 Innovation Parkway
Williamston, MI 48895 USA
Physical Plant:
795 Progress Court, Williamston, MI 48895 USA

Toll-Free: (866) 641-4671
Phone: (517) 641-4671
Fax: (888) 636-8635
info@ledebuhr.net

WANT TO LEARN MORE?

NEED A QUOTE?


CONTACT US




   

Copyright © 2009 Ledebuhr Industries, Inc.  |  All Rights Reserved

Home  |  Atomizers  |  Sprayers  |  Pumps  |  Kits  |  Privacy Policy  |  Contact Us