• Home
  • Atomizers
  • Pumps
  • Sprayers

 Overview | Applications | Flow Dividing Pumps | Discrete Channel Pumps | Common Channel Pumps | Purchase | Purchase Tubing | Resources

Overview | Power Systems | Atomizers | Chem Systems | Structure & Misc.

Purchase an Accu-Staltic™ Peristaltic Pump

(review each tab below to complete a pump)
Overview
Pump Heads
Add a Motor
Dosing System
Build Your Pump

Overview: Purchase an AccuStaltic™ Pump and Motor Combination

What is the best way to specify and purchase an AccuStaltic pump? Good question!

Our pumps are available directly from us and through certain selected resellers and OEMS. You may specify and price your pump by reviewing the above tabs; a webstore is coming soon. Popular configurations are shown, but there are literally thousands of possible combinations. To specify your pump to the final detail, review the "build your pump" tab for the complete list of configurations. If you can't find your configuration or aren't sure what you need, that's OK. Just give us call, email, or fax us- we'll be happy to take care of you.

Your pump can come with or without a motor and control system depending on your needs. We have excellent options to suit most situations. Accu-Staltic pumps are available in 3 three ways:

  1. Pumphead alone ready to receive a hydraulic motor or shaft drive. Popular OEM option. Simply choose a pump from the tabs above, or build your own on the 'Build Your Pump' tab.
  2. Pumphead/gearbox combination, ready to receive your 56C faced electric or air motor. Ideal if you really like your motor supplier or require highly integated control. Select this option on the 'Add a Motor' tab
  3. Complete pump motor package See the 'Add a Motor' and or 'Dosing Systems' Tabs.

How long does it take to get one?

Your pump will be assembled to order from stock components, and typically will ship 5-10 days ARO. We normally have enough of everything to get you a few of almost any pump you can specify. If an option says non-stock, or you need more than 1 or 2 units, please print your cart, then call, fax or email it to us for a firm delivery date.


Step 1. Select a Pump Head

Below are standard AccuStaltic Pump configurations to choose from. Tubing is not specified here; Any standard 1/8" wall standard tube from 1/8" ID to 1/2" ID is included in the price We will confirm these details at the time of order. Standard tubing types include Prothane II™, Suprene®, or Norprene®. Other tubing types are available on request, and may incur additional costs. Common Channel and Flow Dividing pumps are priced with brass fittings standard, See the 'build your pump' tab for stainless steel fitting upgrades.

Click here to go straight to our pump builder page for more options
Photo Example Description Part Number Price
4 channel common channel pump 4 channel flow dividing pump

4 channel discrete manifold pump

4 channel common channel pump, Pictured at left with 3/8", 1/8" wall Prothane II™, brass fittings, left hand motor mount,#AS04CCBX36PL		 AS04FDB3-

AS04DMX3-

AS04CCBX3-

$2624.00

$2824.00

$2624.00
5 channel, no picture

5 channel flow dividing pump

5 channel discrete manifold pump

5 channel common channel pump

AS05FDB3-

AS05DMX3-

AS05CCB3-

$2728.00

$3003.00

$2728.00
6 channel discrete channel pump 6 channel flow dividing pump

6 channel discrete manifold pump pictured at left with 3/8", 1/8" wall Suprene®, left hand motor mount, #AS06DMX36SL

6 channel common channel pump		 AS06FDB3-

AS06DMX3-



AS06CCB3-		 $2831.00

$3161.00



$2831.00
8 Channel Flow dividing Pump, Straight Rotor 8 channel flow dividing pump, straight rotor, pictured at left with 1/4", 1/8" wall Prothane II™ hose, brass fittings, left hand motor mount, #AS8SFDB34PL

8 channel discrete manifold pump, straight rotor

8 channel common channel pump, straight rotor		 AS8SFDB3-



AS8SDMX3-

AS8SCCB3-		 $3101.00



$3541.00

$3101.00
8 channel divided rotor, no picture

8 channel flow dividing pump, divided rotor

8 channel discrete manifold pump, divided rotor

8 channel common channel pump, divided rotor

AS8DFDB3-

AS8DDMX3-

AS8DCCB3-

$3101.00

$3541.00

$3101.00
10 channel discrete manifold with 1/4"ID Prothane II™ tubing, cover open 10 channel flow dividing pump

10 channel discrete manifold pump pictured at left with 1/4", 1/8" wall Prothane II™ tubing, left hand motor mount #AS10DMX34PL

10 channel common channel pump

AS10FDB3-

AS10DMX3-



AS10CCB3-

 $3512.00

$4122.00



$3512.00
12 channel flow dividing pump 12 channel flow dividing pump, pictured at left with 1/4", 1/8" wall Prothane II™ tubing, brass fittings, left hand motor mount #AS12FDB34PL.

12 channel discrete manifold pump

12 channel common channel pump

AS12FDB3-


AS12DMX3-

AS12CCB3-

 $3923.00


$4643.00

$3923.00

Step 2. Add a gearbox and or Motor

After you have chosen your pump, you can add one of the motor packages below. Any pump will accept any of the motor packages below- with a few recommendations where appropriate. View your cart (coming soon) for a total pump and motor package price. If adding your own motor, we strongly recommend you review the following FAQ: Calculating pump torque requirements

.
Photo Example Description Part Number Price  
hydraulic motor kit for Accu-staltic pumps, direct-mounts to pump

Hydraulic motor, includes mounting plate and speed sensor pickup bracket

     
Gearbox only option, add your own 56C motor input

10:1 speed reducing gearbox only, for coupling with 1800 RPM 56C motors. Mounts directly to pump, includes connecting shaft and mounting hardware

     
Gearbox only option, add your own 56C motor input

20:1 speed reducing gearbox, for coupling with 1800 or 3600 RPM 56C faced motors. Mounts directly to pump, includes connecting shaft and mounting hardware.

      
fixed speed motor and gearbox kit

Fixed speed kit, 350 RPM from a 1 HP 3450 RPM motor with 10:1 speed reducing gearbox, 110/220V 1 phase, 50/60 Hz (50 Hz gives 290 RPM).

For pumps up to 6 channels.

     
fixed speed motor and gearbox kit

Fixed speed kit, 180 RPM from a 1 HP 3450 RPM motor with 20:1 speed reducing gearbox. 110/220V 1 Phase, 50/60 Hz (50 Hz gives 145 RPM).

For all pumps.

     
fixed speed motor and gearbox kit

Fixed speed kit, 290 RPM from a 1.5 HP 2900 RPM motor with 10:1 speed reducing gearbox. 110/220 V, 1 phase, 50 Hz only.

For all pumps.

     
fixed speed motor and gearbox kit

Fixed speed kit, 350 RPM from a 1.5 HP 3450 RPM motor with 10:1 speed reducing gearbox. 110/220 V, 1 phase, 60 Hz only.

For all pumps.

     
fixed speed motor and gearbox kit

Fixed speed kit, 350 RPM from a 1 HP 3450 RPM motor with 10:1 speed reducing gearbox, 220/440V 3 phase, 50/60 Hz (50 Hz gives 290 RPM).

For pumps up to 6 channels. Can be controlled by a variable frequency drive.

     
fixed speed motor and gearbox kit

Fixed speed kit, 180 RPM from a 1 HP 3450 RPM motor with 20:1 speed reducing gearbox. 220/440V 3 Phase, 50/60 Hz (50 Hz gives 145 RPM).

For all pumps. Can be controlled by a variable frequency drive.

      
Photo coming soon

Variable speed kit, 350 RPM base speed from a 2 HP 3450 RPM motor with 10:1 speed reducing gearbox, 220V single phase input, 50/60 Hz.

Pump Speed from 50 to 500 RPM (intermittent duty above 400 RPM).

For all pumps. Best for pump speeds above 50 RPM.

     
Photo coming soon

Variable speed kit, 180 RPM base speed from a 2 HP 3450 RPM motor with 20:1 speed reducing gearbox, 220V single phase input, 50/60 Hz.

Pump speed from 25 to 280 RPM continuous. If lower are speeds required, call for design assistance.

For all pumps. Best for pump speeds below 250 RPM.

     
Photo coming soon

Variable speed kit, 350 RPM base speed from a 2 HP 3450 RPM motor with 10:1 speed reducing gearbox, 110V single phase input, 50/60 Hz

Pump speed from 50 to 500 RPM (intermittent duty above 400 RPM)

For all pumps. Best for pump speeds above 50 RPM.

     
Photo coming soon

Variable speed kit, 180 RPM base speed from a 2 HP 3450 RPM motor with 20:1 speed reducing gearbox, 110V single phase input, 50/60 Hz

Pump speed from 25 to 280 RPM continuous. If lower are speeds required, call for design assistance.

For all pumps. Best for pump speeds below 250 RPM.

     

Step 3. Dosing Systems

Accustaltic dosing systems are simple, manual or remotely triggered pump and drive combinations that allow you to pump a highly accurate and repeatable dose, based either on time or on pump revolutions.

Simple control and setup makes them highly desireable for short-run manual, semi-automated or fully automated filling processes. Fill doses from less than 1 ml up to 5 gallons or more per dose.

Choose your pump separately, and add the dosing system below. Ideal for proportional mixing, filling up to 12 identical flows from 1 inflow, and pumping highly sensitive materials.

The dosing system is suitable for cycles up to 1 dose every 5 seconds total cycle time on a continuous basis. Faster cycle times are possible, please call for design assistance.

Photo Example Description Part Number Price  
typical dosing system setup, including control box, brakemotor, and gearbox

Rotation-based dosing system

Each dose is a preprogrammed number of pump revolutions, with a fixed motor speed.

  • Allows manual or automated triggering of dosing cycle.
  • Capable of doses from .5 ml/channel/cycle to 2169 liters/channel/cycle with proper tubing
  • Fast re-programming- less than 30 seconds to change dose.
  • Accuracy: plus or minus 5% or better- call for details.
  • Can prime against negative pressure head and run dry.  
  • Very low maintenance:
    • Lubricate tubing weekly- 5 minutes.
    • Replace tubing every 300 to 2000 hours, depending on fluid, pressure, and tubing chosen. 15 to 30 min.
    • Rebuild pump: 8000 hours (annually based on continuous use) return rotor for core credit, rebuild for 1/3 cost of new pump. Total rebuild time: 3/4 to 1.5 Hours
      
typical dosing system setup, including control box, brakemotor, and gearbox

Time-Based Dosing System:

Same as above specifications, except dose is based on a precise timed cycle and fixed motor speed. Ideal where extreme precision is less important than synchronization with other process machinery.

      
typical dosing system setup, including control box, brakemotor, and gearbox

Time Based Dosing System with Variable Speed Motor (Variable Speed Motor Drive not shown):

Highest level of adjustment and flexibity. Vary speed of pump and length of time to create virtually any dose from .5 ml on up per channel.

Brakemotor is replaced with regenerative brake circuit in the Variable Frequency Drive (not shown).

     
         

 

 

 

 

Specify your pump and motor below, option by option. Choose one option from each step to build a complete package

This page is a work in progress- prices are current, and the shopping cart is on the way. Please print this page for your convenience and call for ordering assistance.

All items in bold are standard. Other items & options may incur additional cost and assembly time.
Category Option Callout Price Select one option from each step
Choose # of Channels Click here for more information
  4 channel pump 04  $2,624.00  
5 channel pump 05  $2,728.00  
  6 channel pump 06  $2,831.00  
Straight or divided rotor available for 8 channel pump. 8 channel straight rotor pump 8S  $3,101.00  
Divided rotor standard. If straight rotor preferred, choose 8S 8 channel divided rotor(standard) 8D  $3,101.00  
*10 & 12 ch. divided rotor only 10 channel pump 10  $3,512.00  
  12 channel pump 12  $3,923.00  
 
Choose Manifold Type Click for more information
Flow Dividing Manifold No additional cost FD  $-    
Discrete Channel Manifold 4 channel pump DM  $220.00  
5 channel pump DM  $275.00  
6 channel pump DM  $330.00  
8 channel straight  DM  $440.00  
8 channel divided rotor(standard)  DM  $500.00  
10 channel pump DM  $610.00  
12 channel pump DM  $ 720.00  
Common Channel no additional cost CC  $ -    
 
Choose Fitting type Click for more information
  Brass(standard) B  $-    
 Custom fittings- call to discuss optionsC Call for cost  
         *This option only available with 1/4", 3/8", and 1/2" ID Tubing All Stainless- 4 channel pump S  $80.00  
  All Stainless- 5 channel pump S  $100.00  
All Stainless- 6 channel pump S  $120.00  
All Stainless- 8 channel pump S  $160.00  
All Stainless- 10 channel pump S  $200.00  
All Stainless- 12 channel pump S  $240.00  
No fittings- Discrete Channel Manifold X  $ -    
 
Choose Tube Wall Thickness Click for more information
  1/16"  (.063)    1
3/32"  (.094)    2
1/8"  (.125)     3
 
Choose Tubing I.D. Click for more information
  1/16" 1
1/8"  2
3/16" 3
1/4"  4
5/16" 5
3/8" 6
1/2" 8
 
Choose Tubing Type Click for more information
  Prothane II™ P standard- no extra cost  
Norprene®A-60-G N standard- no extra cost  
Suprene® Polypropylene elastomer S standard- no extra cost  
Norprene®Food Grade D standard- no extra cost  
Santoprene™ B standard- no extra cost  
None- Customer supplied X $-  
Custom- Viton®, Gore, and others, call to discuss options C Call to discuss cost  
 
Choose mounting position Click for more information
  Left mount (standard) L $-
 (Position facing front of pump) Right mount R $-
 
Choose gearbox or mounting hardware
  None X  $-
  10:1 Gearbox 56C face A  $764.00  
Washdown gearbox, 10:1, 56C B  $764.00  
7.5:1 Cast iron gearbox C  $594.88  
Mounting hardware for hydraulic motor D  $31.57  
5:1 gearbox 56C face E  $764.00  
  20:1 gearbox 56C face F  $764.00  
  Male 1" shaft extension kit G    
 
Choose Motor(optional)
Stainless Steel, 2HP, 3 phase, 3450RPM (std for Vari-speed) A  $913.68
1 HP, Brake motor, TEFC, 1800 RPM B  $875.54  
1.5 HP, 1 phase, 60 hz, 3450 rpm, washdown D  $885.00  
1.5 HP, 1 phase, 50 hz, 2900 rpm, washdown E  $432.95  
1 HP, 3 phase, 3450 rpm, white washdown F  $717.75  
1 HP, 1 phase, 60 hz, 3450 rpm, washdown G  $564.82
  More available- call to discuss options C Call to discuss options
 

Variable Frequency Drive (optional) (may choose both)

2 HP Variable Frequency Drive Controller 110/220V 1 phase input A $900.00  
Counter Based Dosing System B $1000.00  
 
Mounting Base (optional)
Stainless steel mounting base A $200.00  

 

Prothane II™ is a trademark of Randolph-Austin Company
Suprene® is a registered trademark of NewAge Industries, Inc.
Norprene® is a registered trademark of Saint-Gobain Performance Plastics
Santoprene™ is a trademark of ExxonMobil
Viton® is a registered trademark of DuPont Performance Elastomers L.L.C.

 

 

 

 

Accu-Staltic™ pumps are protected under U.S. Patent #5846061

 

Ledebuhr Industries

Manufacturers of the finest quality

Proptec Sprayers and Rotary Atomizers

rotary atomizers and

Accu-Staltic Peristaltic Pumps

multiple channel metering pumps

Ledebuhr Industries, Inc.
Offices: 101 Innovation Parkway
Williamston, MI 48895 USA
Physical Plant:
795 Progress Court, Williamston, MI 48895 USA

Toll-Free: (866) 641-4671
Phone: (517) 641-4671
Fax: (888) 636-8635
info@ledebuhr.net

WANT TO LEARN MORE?

NEED A QUOTE?


CONTACT US




   

Copyright © 2009 Ledebuhr Industries, Inc.  |  All Rights Reserved

Home  |  Atomizers  |  Sprayers  |  Pumps  |  Kits  |  Privacy Policy  |  Contact Us