AccuStaltic™ Manifold Types

Accu-Staltic™ tubing manifolds are what make these pumps so useful and versatile- allowing you to get the most out of our multiple channel design. A manifold can be exchanged by removing 2 simple bolts- allowing you to install another preloaded manifold for fast service during downtime, to change pump tubing size quickly, or to change the use of the pump all together- our manifold designs allow you to configure exactly to your application!

COMMON CHANNEL MANIFOLD Maintains 1 inlet, 1 outlet flow Increases flow capability by using multiple tubes in unison. Flow rates to 40 gallons per minute, with a peristaltic pump! Wide flow range with 0-600 rpm capacity Allows higher flows & pressures than other types of peristaltic pumps- to 70 PSI Eliminates need for hose pumps when large flows are needed Best for flows with suspended particulates of .188" or smaller. Higher pulse frequency for more uniform flow. High vacuum capability (up to 28.5" Hg) for good material flow.
FLOW-DIVIDING MANIFOLD Divides 1 Flow Into Multiple Metered Flows All Stainless Steel Construction Brass Hose Barbs Standard, Optional Stainless Steel Or Plastic Tubes Can Be Changed In Minutes Flow-Thru Design Helps Keep Aggregates In Suspension
DISCRETE CHANNEL MANIFOLD Multiple Tubes Sizes Possible In Same Pump Each Tube Is A Discrete Pump Fluid Containment Within Tubing Pump Converts To Different Tube Size In Minutes No Fittings Or Cavities To Hold Fluid Contamination Clampless Tube Retainer Will Not Kink Or Abrade Tubing Fast Tube Change