resources: click to jump down the page:

Click on the thumbnails below for larger images.

Penguin™ and Penguin PRO™ series Electric Atomizers

Choose a Penguin ™ electrically-powered atomizer when some to all of the following design conditions apply to you:

Fixed installations or portable applications
size and weight of the atomizer is not critical
Ambient environment under 100 degrees F (40 degrees C.)
condensing humidity, dust and dirt are present.
sprayed fluids are only mildly corrosive.
electricity or electric fields are OK; explosion-proof rating not required.
spray rates typically under 4 gallons (16 l ) per minute, with 2 GPM or less as ideal.
no air assist, air assist under 1500 CFM, or air assist from an external source (such as an HVAC system) are specified.
electric power is already on-site and available.

If few or none of these conditions apply to you, you may want to consider our Proptec™series hydraulic powered atomizers.

Penguin series atomizers give high volume, ultra-fine mists that disperse quickly. Incredible ease of installation and use, they have a simple single or 3-phase motor; there are no sophisticated controllers or electronics. Simply wire in the atomizer, plumb a water line, and they are ready to work. NEW for Fall 2008: Operates on 110V or 220V single-phase, 50 OR 60 hertz. 3 phase 220/440V also available.

USA made tropicalized motor- several choices available.
Very fine (<50 micron) to medium droplet spectrum
Atomizer is virtually clog-proof
Radial spray pattern practically unaffected by wear
Conical spray pattern with air-assist option

PENGUIN PRO series atomizers are NEW as of October, 2008. with the premium features you have been demanding:

a feature-rich variable speed drive, allowing them to reach up to 5000 RPM continuously, for the finest fogs and mists we have ever offered in an electric atomizer.
ability to control both the motor and a pump circuit from the Variable Frequency Drive (VFD).
ability to fine-tune droplet size by varying atomizer speed
a stainless-steel motor for the ultimate in environmental resistance and non-contaminating design.
design tested to meet our stringent product life and performance standards

Approximate body dimensions:

5.0" x 7.0" x 9.5" (127mm x 178mm x 241mm)

Click on the following links for basic dimensions of single-stage hydraulic atomizers. Available in PDF format or as 3D drawings.

Dual-Stage Electric, no Air-Assist, with 6" Basket (PDF)(3D Drawing)
Dual-Stage Electric, no Air-Assist, with 12" Basket (PDF)( 3DDrawing)
Dual-Stage Electric, Air-Assist, with 12" Basket (PDF)(3D Drawing)

Chemical flow rates to 2 GPM (7.5 LPM) with higher flow rates available
Fixed operating speed of 3450 RPM (2950 at 50 Hz)
Droplet size from <50 – 1000 microns
Spray pattern of 4' to 13' (1.20m to 3.05m) radius
Power requirements of 110V 1 HP or 220V 1 HP electric power (60 hz), or 1 HP 220/440 3 Phase

STOCK MODELS:

Below are some typical configurations. To see them in operation, visit the Single Stage or Dual Stage pages. To specify your atomizer from scratch, goto the PENGUIN ATOMIZER BUILDER page.

Picture	Callout	Description
coarse mesh basket shown	PT200-20-2T1-0230	Penguin™ PT200 6" fine mesh atomizer 1HP 110/220 V 50/60 Hz single phase, CE rated motor- ready for virtually any installation. 3 phase also available. speed: fixed 3450@ 60 Hz, 2900@ 50 Hz. max fluid flow: 0-.5 GPM weight: approximately 48 pounds (22 Kilograms) noise: 60 Decibels droplet spectrum: fine max particulate in sprayed fluid: .016" (.4 mm) mount any orientation. For flows less than .25 GPM, atomizer should not be installed in the Vertical-Up position.
	PT200-20-2T1-0200	Penguin™ PT200 6" coarse mesh atomizer 1 HP 110/220 V 50/60 Hz single phase, CE rated motor- ready for virtually any installation. 3 phase also available. Speed: fixed 3450@ 60 Hz, 2900@ 50 Hz. Max fluid flow: 0-2 GPM as specified, up to 4 GPM possible. Weight: approximately 48 pounds (22 Kilograms) Noise: 60 Decibels droplet spectrum: medium-fine Max particulate in sprayed fluid: .060" (2 mm) Mount directly, any orientation. For flows less than .25 GPM, atomizer should not be installed in the Vertical-Up position.
	PT200-20-2T1-2230	Penguin™ PT200 12" fine mesh atomizer- the original Penguin atomizer! 1 HP 110/220 V 50/60 Hz single phase, CE rated motor- ready for virtually any installation. 3 phase also available. speed: fixed 3450@ 60 Hz, 2900@ 50 Hz. max fluid flow: 2 GPM. Ideal range: 0-1 GPM weight: approximately 48 pounds (22 Kilograms) noise: 60 Decibels droplet spectrum: very fine to near-fog max particulate in sprayed fluid: .016" (.4 mm) mount any orientation. For flows less than .25 GPM, atomizer should not be installed in the vertical-Up position.
fine mesh basket shown	PT200-20-2T1-2200	Penguin™ PT200 12 " coarse mesh atomizer 110/220 V 50/60 Hz single phase, CE rated motor- ready for virtually any installation. 3 phase also available. speed: fixed 3450@ 60 Hz, 2900@ 50 Hz. max fluid flow: 0-2 GPM, 4 GPM optional weight: approximately 48 pounds (22 Kilograms) noise: 60 Decibels droplet spectrum: very fine max particulate in sprayed fluid: .060" (2 mm) mount any orientation. For flows less than .25 GPM, atomizer should not be installed in the Vertical-Up position.
	PT200-35A-2T1-2230	Penguin™ PT200 12" fine mesh atomizer, air-assisted 2 HP 110/220 V 50/60 Hz single phase, CE rated motor- ready for virtually any installation. 3 phase also available. speed: fixed 3450@ 60 Hz, 2900@ 50 Hz. max fluid flow: 2 GPM. Ideal range: 0-1 GPM weight: approximately 48 pounds (22 kilograms) noise: 70-80 Decibels droplet spectrum: very fine to near-fog max particulate in sprayed fluid: .016" (.4 mm) unguarded fan- must be installed in an inaccessable location mount any orientation.