Penguin Atomizer Builder- injector plate options
Each injector tube can flow a maximum of 2-2.5 gallons of water-like fluid. While higher pressure could allow higher flows, exit velocities from the tube make it preferable to add multiple injector tubes to achieve higher flow rates.
1, 2, 3 or 4 injector tubes are available, for total inflows to 10 GPM.
Your atomizer configuration may not be able to support this high a flow. the power requirement of an atomizer will be a combination of the 1st and second stage atomizer choices, atomizer speed, and flow rate desired.
This page is under construction. please call for assistance.
|
does your spraying solution measure up?
A few benefits rotary atomizers bring to your process:
Spray anything- thinner than water to thick & chunky. If it can be pumped, it can be sprayed.
Non-clogging, non-liming. centripetal force keeps the atomizer clean.
Consistent droplet size over wide flow range. Spray the rate you want with confidence, no nozzles to change.
Long wearing and durable, made in Michigan! Thousands of hours of trouble-free operation in your toughest application environments.
another high performance product group manufactured by:
Toll-Free: (866) 641-4671 Phone: (517) 641-4671 Fax: (888) 636-8635 info@ledebuhr.net |
